Water softener calculators

Size a softener in grains, estimate what the salt will cost, and convert a hardness test into grains per gallon. Every calculator shows its formula and its sources.

Size the unitGrain capacity sizing calculatorSize a softener from household water use, hardness, iron, and days between regenerations.Plan the saltMonthly salt and cost estimatorEstimate salt use and bag cost from usable capacity, salt efficiency or salt dose, and the price you pay.Convert unitsHardness converterConvert ppm or mg/L to grains per gallon and back, classify the result with USGS ranges, and apply an iron adjustment.

How this site works

Softener size is the grains of hardness the resin can remove before it has to regenerate. Daily grains equal the gallons that pass through the unit times the hardness, in grains per gallon, after any iron adjustment you choose to apply. Capacity is that daily load times the days you want between regenerations.

The default water-use figure is the U.S. Geological Survey's 2015 total domestic use of 82 gallons per person per day, which EPA WaterSense also cites. Because outdoor watering often bypasses a softener, the share that goes through the unit starts at 70 percent, the indoor share EPA WaterSense reports, and you can change it. If a figure cannot be tied to an official source, it is a field you fill in. See the sources and method.

All three tools are free and run in your browser.

Common questions

What size water softener do I need?

Start with the grain capacity calculator. For the default example on that page, four people, the USGS 82-gallon average, a 70 percent indoor share, 10 grains per gallon, and four days between regenerations, the load is 9,184 grains. Compare that number to the capacity in the unit manual at the salt dose you will actually use.

How do I convert ppm hardness to grains per gallon?

Divide by 17.1. That is the usual rounded value of the conversion (Maryland Geological Survey states 1 grain per gallon equals 17.118 mg/L). 171 ppm is exactly 10 grains per gallon at 17.1. The hardness converter does the arithmetic and applies the USGS hardness classes.

Do I have to pay to use these calculators?

No. The tools are free. The site may show ads.

Estimates only. These tools are for planning, not a quote, a water test, or professional advice. Confirm hardness and iron with a laboratory or your water quality report. Compare the grain result to the capacity listed in the unit's manual at the salt dose you will actually use, which is often lower than the number printed on the box. This site does not sell equipment or take a cut from any brand.

By James Johnston. Updated November 2026. Estimates for planning, not advice. See sources and method.